Qualities of a good building stone

The following are the qualities or requirements of a good building stone.

1. Crushing strength: For a good building stone, the crushing strength should be greater than l000kg per cm2.

2. Appearance: Good building stone should be a uniform color, and free from clay holes, spots of other color bands etc capable of preserving the color for longtime.

3. Durability: A good building stone should be durable. The factors like heat and cold alternative wet and dry, dissolved gases in rain, high wind velocity etc affect the durability.

4. Fracture: For good building stone its fracture should be sharp, even and clear.

5. Hardness: The hardness greater than 17, treated as hard used in road works. It is between 14 to 17, medium hardness, less 14 said be poor hardness.

6. Percentage wear: For a good building stone, the percentage wear should be equal to or less than 3 percent.

7. Resistance to fire: A good building stone be fire proof. Sandstone, Argillaceous stone resists fire quite well.

8. Specific gravity: For a good building stone the specific gravity should be greater than 8.7 or so.

9. Texture: A good building stone should have compact fine crystalline structure should be free from cavities, cracks or patches of stuff or loose material.

10. Water absorption: For a good building stone, the percentage absorption by weight after 24 hours should not exceed 0.60.

11. Seasoning: Stones should be well seasoned before putting into use. A period of about 6 to 12 months is considered to be sufficient for proper seasoning.

12. Toughness Index: Impact test, the value of toughness less than 13 – Not tough, between 13 and 19 – Moderate, greater than 19- high