Durability of Concrete

Durability of  Concrete

Durability is defined as the capability of concrete to resist weathering action, chemical attack and abrasion while maintaining its desired engineering properties. It normally refers to the duration or life span of trouble-free performance.

Different concretes require different degrees of durability depending on the exposure environment and properties desired. For example, concrete exposed to tidal seawater will have different requirements than indoor concrete.

Concrete will remain durable if:

The cement paste structure is dense and of low permeability

Under extreme condition, it has entrained air to resist freeze-thaw cycle.

It is made with graded aggregate that are strong and inert

The ingredients in the mix contain minimum impurities such as alkalis, Chlorides, sulphates and silt

Factors affecting durability of concrete

Durability of Concrete depends upon the following factors

Cement content

Mix must be designed to ensure cohesion and prevent segregation and bleeding. If cement is reduced, then at fixed w/c ratio the workability will be reduced leading to inadequate compaction. However, if water is added to improve workability, water / cement ratio increases and resulting in highly permeable material.

Compaction

The concrete as a whole contain voids can be caused by inadequate compaction. Usually it is being governed by the compaction equipments used, type of form works, and density of the steelwork

Curing

It is very important to permit proper strength development aid moisture retention and to ensure hydration process occur completely

Cover

Thickness of concrete cover must follow the limits set in codes

Permeability

It is considered the most important factor for durability. It can be noticed that higher permeability is usually caused by higher porosity .Therefore, a proper curing, sufficient cement, proper compaction and suitable concrete cover could provide a low permeability concrete